Select a different country or region to see content for your location.
United States
02:11:43 GMT+0000 (Coordinated Universal Time)
B71917-C-T-P4S-UL
Spindle bearing
Spindle bearing B719..-C, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances
Replaces
B71917C.T.P4S.UL, B71917C.TPA.P4.UL
Preferred product
Frequently bought together
Main Dimensions & Performance Data
| d | 85 mm | Bore diameter |
| D | 120 mm | Outside diameter |
| B | 18 mm | Width |
| Cr | 47.000 N | Basic dynamic load rating, radial |
| C0r | 33.500 N | Basic static load rating, radial |
| Cur | 3.500 N | Fatigue load limit, radial |
| nG Grease | 11.000 1/min | Limiting speed for grease lubrication |
| nG Oil | 17.000 1/min | Limiting speed for oil lubrication |
| ≈m | 0,544 kg | Weight |
Mounting dimensions
| da | 92 mm | Diameter shaft shoulder |
| da | h12 | Diameter shaft shoulder clearance |
| Da | 114 mm | Shoulder diameter outer ring |
| Da | H12 | Shoulder diameter outer ring clearance |
| ra max | 0,6 mm | Maximum recess radius |
| ra1 max | 0,6 mm | Maximum recess radius |
| Etk min | 95,9 mm | Minimum diameter injection pitch |
| Etk max | 99,3 mm | Maximum diameter injection pitch |
| Etk1 min | 95,9 mm | Minimum diameter injection pitch |
| Etk1 max | 99,3 mm | Maximum diameter injection pitch |
| a | 22,7 mm | Distance between the apexes of the pressure cones |
Dimensions
| rmin | 1,1 mm | Minimum chamfer dimension |
| r1 min | 1,1 mm | Minimum chamfer dimension |
| α | 15 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 100 °C | Operating temperature max. |
Additional information
| FV L | 237 N | Preload force light |
| FV M | 788 N | Preload force medium |
| FV H | 1.597 N | Preload force heavy |
| KaE L | 726 N | Lift-off force light |
| KaE M | 2.609 N | Lift-off force medium |
| KaE H | 5.644 N | Lift-off force heavy |
| ca L | 80 N/µm | Axial rigidity light |
| ca M | 136 N/µm | Axial rigidity medium |
| ca H | 195 N/µm | Axial rigidity heavy |
Your current product variant
| Contact angle | C | Contact angle 15° |
| Sealing | Without | Not sealed |
| Cage | T | Laminated fabric cage |
| Tolerance class | P4S | Tolerance class P4S, FAG standard better than P4 to DIN 620 |
| Arrangement bearing set | U | Single bearing |
| Preload | L | Preload light |
Characteristics
