Wählen Sie ein anderes Land oder eine andere Region aus, um Inhalte für Ihren Standort anzuzeigen.
Vereinigte Staaten von Amerika
04:37:58 GMT+0000 (Coordinated Universal Time)
HCB7005-E-T-P4S-UL
Spindle bearing
Spindle bearing HCB70..-E, adjusted, in pairs or sets, contact angle α = 25°, with ceramic balls, restricted tolerances
Ersetzt
HCB7005E.T.P4S.UL
Wird oft zusammen gekauft
Main Dimensions & Performance Data
| d | 25 mm | Bore diameter |
| D | 47 mm | Outside diameter |
| B | 12 mm | Width |
| Cr | 13.100 N | Basic dynamic load rating, radial |
| C0r | 5.400 N | Basic static load rating, radial |
| Cur | 435 N | Fatigue load limit, radial |
| nG Grease | 40.000 1/min | Limiting speed for grease lubrication |
| nG Oil | 63.000 1/min | Limiting speed for oil lubrication |
| ≈m | 65,13 g | Gewicht |
Mounting dimensions
| da | 30 mm | Diameter shaft shoulder |
| da | h12 | Diameter shaft shoulder clearance |
| Da | 42 mm | Shoulder diameter outer ring |
| Da | H12 | Shoulder diameter outer ring clearance |
| ra max | 0,6 mm | Maximum recess radius |
| ra1 max | 0,3 mm | Maximum recess radius |
| Etk min | 32,5 mm | Minimum diameter injection pitch |
| Etk max | 34,1 mm | Maximum diameter injection pitch |
| Etk1 min | 32,5 mm | Minimum diameter injection pitch |
| Etk1 max | 34,1 mm | Maximum diameter injection pitch |
| a | 14,4 mm | Distance between the apexes of the pressure cones |
Dimensions
| rmin | 0,6 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| α | 25 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 100 °C | Operating temperature max. |
Additional information
| FV L | 40 N | Preload force light |
| FV M | 194 N | Preload force medium |
| FV H | 443 N | Preload force heavy |
| KaE L | 117 N | Lift-off force light |
| KaE M | 573 N | Lift-off force medium |
| KaE H | 1.338 N | Lift-off force heavy |
| ca L | 55 N/µm | Axial rigidity light |
| ca M | 97 N/µm | Axial rigidity medium |
| ca H | 133 N/µm | Axial rigidity heavy |
